Set of 2 Cream Humbucker Mounting Rings for Standard size Humbucker pickups
Standard Slanted Tapered Type Flat Bottom Rings and are made for Flat Top guitars.
Will "give" a little for a small arch or contour.
1 x Thin for Neck Position 3mm (1/8inch) on the short side and 5mm (3/16in) on the taller side.
1 x Thick for Bridge Position 7mm (1/4inch) on the short side and 9mm (3/8in) on the taller side.
Includes 8 - 2mm x 15mm Chrome Oval Head Mounting screws (3.5mm heads).
Caution!!! The screws require an adequate pilot hole in depth and diameter (12mm depth and 1/16" diameter. Don't be foolish in thinking you can self tap the screws. If you are threading them into an existing hole and they bind up, STOP and prep the hole to spec. Forcing the screws WILL result in them breaking.